Appearance Dimensions

• * Number of adaptor clamping screws(※1) is eight in rated capacities of 10kN and 20kN.
• * This Model of load cell should be mounted on an intended position in such a manner that its mounting jigs never get into touch with the surface "A".
  Note that the recommended distance between the jigs and the surface "A" will be 0.5 to 1 mm.
• * Weight shown in the above list does not include weight of the cables.

Specifications

REMARKS: Load cells of this Model can also be applied to a compression use althouth Model DB load cells of standard version are supplied with a calibration sheet treating data to tension direction only. We can say from our back data of this Model that its compression sensitivity and tension sensitivity are almost the same each other, namely, within 0.2%, but we can willingly effect a compression load test with this Model whenever necessary on extra cost.

Instruction Manual・・・・・This project is under planning. Please call on us for details, if necessary.

All the instruction nanuals are of Portable Documents Formats. For reading the instruction manual, it is necessary to be installed yourself in the Adobe Reader of Adobe Company. Adobe Reader is the registered trademark of Adobe Systems Co., Ltd.