Specifications
Item | Description |
---|---|
Sensor applied voltage | DC10V/5V/2.5V Output current: within 120mA 4-wire system Applied voltage digital adjustment |
Sensor input range | -3.0 ~ +3.0 mV/V |
Gain adjustment | Automatic adjustment through internal operation. |
Equivalent input calibration range |
Setting Range: 0.500 mV/V to 3.000 mV/V. Error: Within 0.1% FS. |
Display | STN Color LCD (320 x 240 dots) Indicator value: ±99999 |
Display unitt | Weight: kg, g, t, Force: N, kN, Nm Pressure: N/m2, Pa, kPa, MPa, bar * "No-unit" setting is also feasible |
A/D converter | Speed: 2000 times/second 16 bit (binary) |
Accuracy | Non-linearity: within 0.02%FS ±1 digit (during 3.0 mV/V input); Zero drift: within 0.5μV/℃ RTI; Gain drift: 0.01%/℃) |
Analog filter | 10/30/100/300 Hz digital adjustment |
Wave profile holding | < Tracking & Sample Hold > Peak/Bottom/P-P/Mean---Range setting Max Peak Value,Min Peak Value,Point of inflection |
External output signal | Upper/lower limit comparison open collector output (HH, HI/OK/LO/LL); Holding end output (H/E); Serial data output (SI/F); asynchoronous 600bps |
Control input signal | Graphic START/STOP input; multi-holding (comparison, holding) setting values selective input; Holding control input; Digital zero-input |
Supply voltage | AC100~240V ( ±10%) 50/60 Hz; DC12~24V( ±15%) (Specify for DC during ordering) |
Operating conditions | Temperature: -10 ~ +40℃; Humidity: 80% RH or lower (no condensation) |
External dimension | 100 (W) x 96 (H) x 138 (D) mm(not including protruding parts) Panel cut dimension 92 x 92 (+1-0)mm |
Weight | About 1kg |