Product Information

"MD2" / High accuracy 2-Component Load Cell

Features

High accuracy (Accuracy class to be 0.025%). 2-component load cell consisting of Fx and Fz.
Excellent in crosstalk (within 1%) and in load leaving off coefficient.
Built-in mechanical device (consisting of a balancing mechanism for pressure variations) hardly receiving any effects from atmospheric pressures.
Can offer special versions providing top and bottom flanges for installation (note that a pressure balancing device cannot be afforded on this special version).
Applications: For measurement of friction coefficient, for scratching test and so on.

Related products : 6-Component force sensor

Appearance Dimensions

product_dimension

Model and Capacity / Dimension / etc. (unit : mm)
Model	Fx	Fz	Weight
MD2-50N	50N	50N	0.6kg
MD2-100N	100N	100N	0.6kg
MD2-200N	200N	200N	0.6kg
MD2-500N	500N	500N	0.6kg

* The weight indicated in the tables of this data sheet does not include the weight of cables.
* The load leaving off coefficient:
1. Fx: The maximum load leaving off range: 20 mm maximum from the end surface of the loading screw. The load leaving off coefficient: Within 0.2%/cm
2. Fz: The maximum load leaving off range: 50 mm in diameter maximum from the center of the loading screw. The load leaving off coefficient: Within 0.2%/cm.

Specifications

Safe Overload	150%RC
Rated Output	1mV/V±1%
Nonlinearity	0.025%RO
Hysteresis	0.02%RO
Repeatability	0.02%RO
Excitation Voltage	12V (or less)
Safe Excitation Voltage	20V (or less)
Input Rsistance	350Ω
Output Rsistance	350Ω
Compensated Temp.Range	-10 to 60℃
Safe Temp.Range	-30 to 80℃
Temp.Effect on Zero	0.003%RO/℃
Temp.Effect on Output	0.002%/℃
Crosstalk	within 1%RO（Between respective components）
Cable	Φ 6mm-4wire shielded cable, length : 2ｍ

* Can meet the requirements for changing the length of cables and for mounting the connectors (NDIS Standard) on the cables.
* Contact us directly regarding low cost versions, and for the top and bottom flanges mounting versions (but without pressure balancing devices).

Instruction Manual・・・・・This project is under planning. Please call on us for details, if necessary.

All the instruction nanuals are of Portable Documents Formats. For reading the instruction manual, it is necessary to be installed yourself in the Adobe Reader of Adobe Company. Adobe Reader is the registered trademark of Adobe Systems Co., Ltd.

<< Home << Back << PageTop

"MD2" / High accuracy 2-Component Load Cell

Features

Appearance Dimensions

Specifications

Instruction Manual・・・・・This project is under planning. Please call on us for details, if necessary.

Product Menu

Tech Information