Appearance Dimensions
| Model | Capacity | Natural frequency | Transient Temp. characteristic※2 | Weight |
|---|---|---|---|---|
| MPB-100KPA | 100kPa(1.020kgf/cm2) |
22kHz |
0.90%RO/℃ |
0.3g |
| MPB-200KPA | 200kPa(2.039kgf/cm2) |
31kHz |
0.65%RO/℃ |
0.3g |
| MPB-500KPA | 500kPa(2.039kgf/cm2) |
49kHz |
0.35%RO/℃ |
0.3g |
| MPB-1MPA | 1MPa(10.20kgf/cm2) |
69kHz |
0.35%RO/℃ |
0.3g |
- * The weight indicated in the tables of this data sheet does not include the weight of relay cables.
- * The numerical values of the natural frequency in this data sheet are the calculated values of the independent single elastic substance. The pressure response is dependent on features of the pressure media and so on.
- ※1 Model MP Pressure is of a design to transmit output in proportion with the force to be measured by applying a pointing load to the center of the diaphragm surface. Contact us for details whenever necessary.
- ※2 The transient temperature characteristics are the variations in the zero balance which may take place when the pressure receiving surface of the sensor might be subject to a rapid temperature change caused by the pressure media and so on. This change is expressed in 100 percent of the rated output per every 1℃ in temperature difference between the sensor temperature (namely, circumferential temperature) and the temperature of the pressure media and so on.
